Click Here For More Info.

Auto PAC 300

The following features are standard on the Auto PAC 300.

• Lubrication Free Strapping Head- The strapping head never needs lubrication

• Auto Feeding- Loading strap is automatic, activated by pressing the reset switch.

• Jam Free Automatic Re-Feeding- In the event of any feeding problems, the strap is automatically re-fed into the strapping head, and the machine returns to the ready position.

• Loop Ejection- Missed straps are automatically ejected from the machine, and the Auto PAC 300 re-sets itself.

• End of Strap Sensor- If the coil does not have enough strap to complete the cycle, the Auto PAC 300 ejects the short piece, and the machine is immediately ready for a new coil.

• Three Activation Methods- The Auto PAC 300 can be activated manually with a foot pedal or with a standard photocell.

• Electronic Tension- Tension is controlled electronically, yielding consistent tension.

• Improved Speed- Up to 30 cycles per minute.

• CE Certified

Click Here For More Info.

• Auto Strap Loading - The SM2000 loads with the touch of a button.

• Loop Ejector and Auto Re-Feed - Non completed cycles are automatically cleared and re-fed.

• One-Piece Strap Track - The unique, fully accessible, strap track reduces strap dust and applies consistently parallel straps.

• Electric Photo Eye - Standard on the SM2000, the adjustable photo eye gives you several automatic strapping options.

• 4 Modes of Activation - The strap cycle can be activated by photocell, magnetic palm switch, and remote foot pedal or foot bar.

• Fast and Economical - Up to 50 cycles per minute of low cost 5, 6, or 9mm strap.

• Low Maintenance - The SM2000 has 30% fewer moving parts than comparable machines, uses brushless DC motors, and requires minimal lubrication.

• Portable Design - Four heavy-duty casters (two locking), compact design, and 110volt power makes the SM2000 easy to set up at any location.

Click Here For More Info.

Standard features on the Auto PAC 300 Side Seal include.

• Lubrication Free Strapping Head- The strapping head never needs lubrication

• Auto Feeding- Loading strap is automatic, activated by pressing the feed switch.

• Jam Free Automatic Re-Feeding- In the event of any feeding problems, the strap is automatically re-fed into the strapping head, and the machine returns to the ready position.

• Loop Ejection- Missed straps are automatically ejected from the machine, and the Auto PAC 300 Side Seal re-sets itself.

• End of Strap Sensor- If the coil does not have enough strap to complete the cycle, the Auto PAC 300 Side Seal ejects the short piece, and the machine is immediately ready for a new coil.

• Electronic Tension- Tension is controlled electronically, yielding consistent tension.

• Improved Speed- Up to 30 cycles per minute.

• CE Certified

Click Here For More Info.

• Lubrication Free Strapping Head- For consistent, reliable operation.

• Auto Feeding- Loading strap is automatic, activated by pressing the feed switch.

• Jam Free Automatic Re-Feeding- In the event of any feeding problems, the strap is automatically re-fed into the strapping head, and the machine returns to the ready position.

• Loop Ejection- Missed straps are automatically ejected from the machine, and the Auto PAC 300 re-sets itself.

• End of Strap Sensor- If the coil does not have enough strap to complete the cycle, the Auto PAC 300 SSM-ST ejects the short piece, and the machine is immediately ready for a new coil.

• Optional Adjustable Stainless Table

• Remote Foot Controller

• Dual Controls- Full control panel on the front and an abbreviated operator's panel on the back allows operation from either side.

• Stainless Splash Panels and a Heat Generating Transformer- To minimize moisture.

• Electronic Tension- Tension is controlled electronically, yielding consistent tension.

• CE Certified

Click Here For More Info.

The affordable narrow strap alternative

The Altus 250 is a reliable automatic strapper that uses economical narrow strap and is available at a very affordable price.  Originally developed for the mailing and printing industry, the Altus 250 is ideally suited for a wide variety of customers who want to use low cost narrow strap, and don't need to run at very high speeds. Unlike many competing machines, the Altus 250 is not a table top strapper with an arch added. It was designed as an automatic strapper and has all the features normally found on much more expensive machines, the Altus 250 is backed by a robust warranty, a complete parts warranty, and our own in house service department.

Standard features on the Altus 250 include:

·         Compact Mechanical Control Head - The unique control head of the Altus 250 uses 30% fewer parts than comparable models. Maintenance costs are dramatically reduced.

·         Two Activation Models - In addition to the panel switch, a foot pedal switch s standard on all Altus 250 units.

·         Electronic Tension Control - Tension is controlled electronically with an external knob - no need to open the machine.

·         Easy Feeding - Strap feeding is quick and efficient.

·         Positive Strap Alignment - A unique alignment device assures consistent, strong weld joints.

·         Loop Ejector - If the Altus 250 is operated without a package, the strap will eject a loop and re-feed the strap for the next cycle.

·         Jam Free Automatic Re-Feeding - Any feeding issues are automatically cleared, and the Altus 250 returns to the ready position.

Click Here For More Info.

• Adjustable Photocell Activation- Photocells automatically place straps at precise locations on your package.

• Simplified Control Panel- Strap Selection (0, 1, 2 or 3), Tension, Conveyor Speed and Compression are all controlled from a conveniently located control panel. Place 0, 1, 2 or 3 straps by a selector switch on the control panel

• Variable Conveyor Speed- Conveyor speed is easily adjusted from the control panel.

• Auto Feeding- Loading strap is automatic, activated by pressing the start button.

• Jam Free Automatic Re-Feeding- In the event of any feeding problems, the strap is automatically re-fed into the strapping head, and the SM2000-FA returns to the ready position.

• DC Motors- The SM2000-FA is powered by 24V DC motors. In addition to exceptional reliability, DC motors assure maximum safety.

• Jack Bolts- In addition to heavy duty casters, standard adjustable jack bolts stabilize the unit and allow for adjustable table height